STB-IDMA-MER

The STB-IDMA-MER is a Simplified Termination Board (STB) specifically designed to help the installer terminate up to eight (8) Acenes iDMA/iDEA devices to any Mercury-based security system using the MR16IN and MR16OUT boards.

All internal wiring is done at the PCB, saving interface wiring time and eliminating wiring mistakes. The installer needs to only provide the RS-485 communication cable from the host controller and 12V/24V @5A from any available power source.

For ease of installation, the STB-IDMA-MER offers simple, legibly marked plugin/ removable eight-pin SUPU-type connectors. For aesthetics and wiring order, it features a finger trough for cable management and is designed to fit into a standard LSP E2 enclosure.

• Simplifies the termination of the 8 conductors cables from the iDMA/iDEA

• Use of SUPU plug-in and removable connectors. This simplifies wiring and troubleshooting without the need to unscrew any wiring

• Mounting of Mercury Inputs/Outputs (MR16-IN/OUT) boards are plug-and-play

• Support for 8 iDMA/iDEA with prewired inputs/outputs while using the iDMA/iDEA default configuration of:

  • 24V power

  • IN1: Alarm status report to the MR16IN input controller

  • OUT1: Bypass/Shunt status report to the MR16IN input controller

  • OUT2: Bypass/Shunt/un-shunt and Silence pulses from the MR16OUT output controller

• Eliminates any wiring mistakes to MR16-IN/OUT as internal wiring are done at the PCB level

• Each iDMA’s 24V power feed is protected via PTC. Having a wiring short at any device will not interfere with other iDMA/iDEA controllers

• Each iDMA’s connector has a status LED indicating 24V power presence. In case of current overdraw or wiring short, the LED will not light up.

• MR16-IN/OUT power & data wiring to Mercury controller is automatically routed via the PCB as needed

• STB – iDMA-MER Requires external 24V /5A power supply

The STB – iDMA-MER has no configurable jumpers, however, via the iDMA mobile BLE application, other alarms/status can be configured such as:

• Tamper alarm

• Door alarm status

• Tamper alarm

• Fire alarm connection and monitoring

• Door held open

• Door contact status replication