




STB-IDMA-SWH
Terminating iDMA using Software House ports
Name
STB-IDMA-SWH
Acenes Part
STB-IDMA-SWH
The STB-IDMA-SWH is a Simplified Termination Board (STB) specifically designed to help the installer terminate up to eight (8) Acenes iDMA/iDEA devices to Software House-based security system using the IN8 (I8) and OUT8 (R8) boards.
All internal wiring isdone at the PCB, saving interface wiring time and eliminating wiring mistakes. The installer needs to only provide the RS-485 communication cable from the iStar controller and 12V/24V @5A from any available power source.
For ease of installation, the STB-IDMA-SWH offers simple, legibly marked plugin/ removable eight-pin SUPU-type connectors. For aesthetics and wiring order, it features a finger trough for cable management and is designed to fit into a standard LSP E2 enclosure.
Simplifies the termination of the 8 conductors cables from the iDMA/iDEA
Use of SUPU plug-in and removable connectors. This simplifies wiring and troubleshooting without the need to unscrew any wiring
Mounting of Software House Inputs/Outputs (I8/R8) boards are plug-and-play
Support for 8 iDMA/iDEA with prewired inputs/outputs while using the iDMA/iDEA default configuration of:
24V power
IN1: Alarm Status report to the I8 input controller
IN2: Bypass/Shunt status report to the I8 input controller
OUT1: Bypass/Shunt/un-shunt and Silence pulses from the R8 output controller
Eliminates any wiring mistakes to the I8/R8 as internal wiring are done at the PCB level
Each iDMA/iDEA 24V power feed is protected via PTC. Having a wiring short at any device will not interfere with other iDMA/iDEA controllers
Each iDMA/iDEA connector has a status LED indicating 24V power presence. In case of current overdraw or wiring short, the LED will not light up.
I8/R8 power & data wiring to SWH iStar controller is automatically routed via the PCB as needed
STB – iDMA-SWH Requires external 24V /5A power supply
The STB – iDMA-SWH has no configurable jumpers, however, via the iDMA mobile BLE application, other alarms/status can be configured such as:
Tamper alarm
Door alarm status
Tamper alarm
Fire alarm connection and monitoring
Door held open
Door contact status replication


